- Free Shipping Limited time only in the GTA
Hanging acrylic art on a wall is similar to hanging other forms of wall art but with a few key considerations to protect the acrylic material and ensure it is securely mounted. Here’s a step-by-step guide:
Standoffs are metal hardware pieces that allow the acrylic to be mounted with a gap between the art and the wall, giving a modern floating effect.
Measure and mark the placement: Hold the acrylic against the wall and use a level to ensure it’s straight. Use a pencil to mark where the holes should be drilled (based on the pre-drilled holes in the acrylic for the standoffs).
Drill the holes: Drill holes into the wall at the marked points. If you’re drilling into drywall or plaster, use wall plugs for extra support.
Install the standoffs: Screw the base of the standoff into the wall using screws and anchors (if needed). Place the acrylic over the standoff posts.
Secure the acrylic: Once the acrylic is in place, screw the caps onto the standoff posts to hold the acrylic securely.
French cleats provide strong support and are ideal for heavier acrylic pieces.
Attach the cleat: Attach one part of the French cleat to the back of the acrylic, ensuring it’s centered and level.
Mount the wall cleat: Attach the other part of the cleat to the wall where you want to hang the acrylic. Make sure the cleat is level and securely screwed into wall studs or anchors.
Hang the acrylic: Once both cleats are in place, hang the acrylic by slotting the cleats together.
For smaller, lighter acrylic pieces, you can use heavy-duty Command Strips that don’t damage the walls.
Prepare the surfaces: Clean both the wall and the back of the acrylic with rubbing alcohol to ensure the Command Strips adhere properly.
Attach the strips: Apply the Command Strips to the back of the acrylic, following the weight guidelines for the strips. Then, press the acrylic onto the wall where you want it to hang.
Hold firmly: Hold the acrylic against the wall for about 30 seconds to ensure a secure bond.
Avoid direct sunlight: Acrylic can discolor or warp with prolonged exposure to direct sunlight.
Cleaning: Use a microfiber cloth and a non-abrasive cleaner to clean the surface of the acrylic before hanging.
Avoid bending: Handle the acrylic carefully as it can scratch or crack if bent too much.
Choose the method that best suits the size, weight, and style of your acrylic art!
